5250 Connect User’s Guide
120
3 Navigate to the correct screen. For this example, you would type in a
UserID and Password and in the Program/Procedure field, “MENU”
would be entered.
4 Press Enter on the keyboard. This example displays an “INSTRUCTIONS”
5250 screen in the Native Environment pane.
NOTE: Alternatively, you may select Enter on the 5250 tool bar within the
Native Environment pane. To view this tool bar, select View from the 5250
Component Editor menu bar, then Keypad Toolbar.
5 In this example, “BRWS” is entered in the TRANSACTION field and
“10001” in the NUMBER field.
6 Press Enter on the keyboard. A “FILE BROWSE” 5250 screen appears.
7 For multi-row actions the user needs to define the area that contains
repeating data either manually or by highlighting the area. In this example,
the user identifies the data area and drags the cursor it, beginning in the
upper right hand corner and moving to the lower left hand corner. A gray
background highlight appears over the drag marquee.
NOTE: Make sure that you start your drag process with your cursor outside
of the first field. If you start dragging within a field, Composer assumes you
are trying to move the field itself.
