A Summary of Commands rmdb
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 564
rmdb
The rmdb command displays the state of the resource manager (RM) and
modifies the debug levels.
Synopsis
rmdb [-l] [-s] [-u] [-d [<range>] ] [-g [<range>] ] [-f [<range>] ] [-p
[<range>] ]
[-C [<range>] ] [-T [<range>] ] [-P [<range>] ] [-i [<interval>] ]
[-tL [<levelMask>] ] [-tA [<levelMask>] ] [-tc <channel>] [-tC <channel>]
Description
The rmdb displays the state of the resource manager and modifies the debug
levels. The valid syntax for ranges is as follows:
value [-value] [, value] | [value-value]*
Specifying a value an odd number of times indicates that it will be displayed.
Specifying a value an even number of times indicates that it will not be
displayed. For example, 7-10,9 will display the items associated with values
7, 8, and 10. The 9 entry is excluded since it was specified two times.
The rmdb command accepts the arguments shown in Table 35 on page 565
.
