A Summary of Commands iCk, iCkAdmin
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 478
As a daemon process, iCk accepts one flag, the -v flag, which initializes the
internal verbosity flags according to the value NNN provided. This value can
be in decimal, hexidecimal, or octal. None of the symbolic flag names apply in
this mode. Table 32
describes the bit meanings.
Table 32. Verbosity Flag Values
Bit Name Description
0x0001 V_RESCANBB Log messages whenever the Bulletin Board is rescanned
0x0002 V_TIMINGMSG Log messages when timing messages are sent
0x0004 V_HUNGPROCESS Log messages when hung process checking is performed
0x0008 V_AUTOREBOOT Log messages when autoreboot processing is performed
0x0010 V_FILEMAX Log messages when maximum file checks are performed
0x0020 V_FILECHECK Log messages when file ownership/modes are checked
0x0040 V_PIPECMDS Log messages when pipe commands are received
0x0080 V_TRACE Log messages about all major routines in iCk
0x0100 V_SERVICE Log messages whenever a service is queued or
performed
