A SERVICE OF

logo

A Summary of Commands spar
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 575
Example
spadc -m 20 -s 10
This command collects the signal processing resource data in 10-second
increments for a total of 20 minutes.
See Also
spar
spar
The spar command is the signal processing resource reporter.
Synopsis
spar [-ablmp] [-t min] [-f file]
Description
The spar command executes a program that reports on the signal processing
data activity collected by the spadc command.
The spar command options determine the report format:
-b board (circuit card)
-a algorithm