A SERVICE OF

logo

Chapter 2 Printing Tasks 95
Selecting the Input Tray
6 Press down on all four corners of the paper
stack to ensure the paper rests flat in the tray,
without bending.
Note
Do not store paper in the free area on the left
side. Serious damage may occur to the unit.
7 Close Tray 4.
8 Make sure that the paper size tab is set
correctly.
Note
See Printing by Type and Size of Paper
on
page 144
to set the type of paper you loaded in
the tray.
If using the Standard Output Bin, remember to
adjust the paper stop guide on the output bin.
See page 99.
8
7
6