Chapter 5 Problem Solving 205
Understanding Printer Messages
LOADING
PROGRAM <number>
alternates with
DO NOT POWER OFF
Programs and fonts can be stored on the printer’s file system. At
bootup time these entities are loaded into RAM. (These entities can
take a long time to load into RAM depending on the size and number
of entities being loaded.) The <number> specifies a sequence number
indicating the current program being loaded.
MANUALLY FEED
[TYPE] [SIZE]
Load the requested paper into Tray 1.
Press G
O
if the desired paper is already loaded in Tray 1.
MEMORY FULL
STORED DATA LOST
There is no available memory in the printer. The current job might
not print correctly and some resources (such as downloaded fonts
or macros) might have been deleted.
You might want to add more memory to the printer (page 392
).
MEMORY SETTINGS
CHANGED
The printer changed its memory settings because it did not have
enough memory to use the previous settings for I/O Buffering and
Resource Saving. This usually occurs after removing memory from
the printer, adding a duplexer, or adding a printer language.
You might want to change memory settings for I/O Buffering and
Resource Saving (although default settings are usually best) or add
more memory to the printer (page 392
).
Printer Messages (continued)
Message Explanation or Recommended Action
