Appendix B Control Panel Menus 381
Configuration Menu
JAM RECOVERY=
AUTO
AUTO
ON
OFF
This item determines how the printer behaves when a
paper jam occurs.
AUTO: The printer automatically selects the best mode for
printer jam recovery (usually ON). This is the default
setting.
ON: The printer automatically reprints pages after a paper
jam is cleared.
OFF: The printer does not reprint pages following a paper
jam. Printing performance might be increased with this
setting.
MAINTENANCE
MESSAGE=OFF
OFF This item appears only after the PERFORM PRINTER
MAINTENANCE message displays.
OFF: The PERFORM PRINTER MAINTENANCE message will be
cleared. If you do not replace the maintenance kit, the
PERFORM PRINTER MAINTENANCE message will be displayed
again after approximately 17,500 pages.
The message should not be turned off unless the printer
maintenance has been performed. If the required
maintenance is not performed, the printer’s performance
will degrade.
Item Values Explanation
