Appendix B Control Panel Menus 389
EIO Menu (8100 N/8100 DN)
CFG TCP/IP=NO NO
YES
NO: The TCP/IP Menu is not accessible.
YES: The TCP/IP Menu appears. In the TCP/IP Menu, you
can specify BOOTP=YES for TCP/IP parameters to be
automatically loaded from a bootp or DHCP server when
the printer is turned on. If you specify BOOTP=NO, you can
manually set selected TCP/IP parameters from the control
panel. You can manually set each byte of the IP address
(IP), Subnet Mask (SM), Syslog Server (LG), and Default
Gateway (GW). For example:
If the Syslog Server IP address is left blank, the printer will
still work. Also, you can manually set the Timeout time
period.
CFG ETALK=NO NO
YES
NO: The EtherTalk Menu is not accessible.
YES: The EtherTalk Menu appears. In the EtherTalk Menu
you can set the AppleTalk phase parameter (ETALK PHASE=1
or 2) for your network.
Item Values Explanation
192.0.0.192
Byte 1
Byte 2
Byte 3
Byte 4
