A SERVICE OF

logo

Open as PDF
next previous
Chapter 2 Printing Tasks 131
Printing Special Paper
If the settings are not available from the software, set the custom paper size
from the control panel:
1 From the Printing Menu set CONFIGURE CUSTOM PAPER=YES.
2 From the Printing Menu, select inches or millimeters as the unit of
measurement.
3 From the Printing Menu, set the X dimension (the front edge of the paper)
as shown in the illustration above. X can be from 3.9 to 11.7 inches (from
98 to 297 mm) for Tray 1. Set the Y dimension (the side edge of the paper)
as shown in the illustration above. Y can be from 7.5 to 17.7 inches (from
191 to 450 mm) for Tray 1.
Continued on next page.
X (front edge)
7.5 in. (191 mm)
Y (side edge)
3.9 in. (98 mm)