A SERVICE OF

logo

Open as PDF
next previous
Chapter 5 Problem Solving 226
Correcting Output Quality Problems
Correcting Wrinkles on Envelopes
Note
Once you have used this method to print
envelopes, return the fuser levers to the up
position.
1 Open the left door. (If a mailbox accessory is
installed, first push it away from the printer to
access the left door.)
WARNING!
Avoid touching the adjacent fusing area. It may
be HOT.
2 Locate and release the levers on the fuser.
3 Close the left door.
When you are done printing on envelopes, make
sure you return the fuser levers to the up
position.
1
2
3