A SERVICE OF

logo

EPSON Stylus Color 900 Revision C
Disassembly and Assembly Disassembly Procedures 114
4.2.7.2 CR Motor Removal
1. Remove the printer mechanism. (See Section 4.2.2.)
2. Release the carriage lock at the back of the printer mechanism, then
move the carriage unit away from the home position. (See Figure
4-13.)
3. Remove two screws securing the CR motor to the printer
mechanism, and remove the CR motor.
Figure 4-17. CR Motor Removal
Screw securing the CR Motor
CAUTION
After removing/replacing the CR Motor, perform any
necessary adjustments. (See Table 4-1)