Filter
Top Products
4-7
Clock, hour meter and voltage display
modes
1. Clock/Hour button “ / ”
2. “H” button 3. “M” button
4. Clock/Hour meter/Voltage display
Pushing the “ / ” button switches the dis-
play between the clock mode “CLOCK”, the
hour meter mode “HOUR”, and the voltage
display mode “btry” in the following order:
CLOCK → HOUR → btry → CLOCK
To set the clock
1. Set the display to the clock.
2. Push the “ / ” button until the clock
starts flashing.
3. Set the hours by pushing the “H” button.
4. Set the minutes by pushing the “M” but-
ton.
5. Push the “ / ” button, and then re-
lease it to start the clock.
4
1
2
3
EE.book Page 7 Thursday, September 6, 2007 4:28 PM