Filter
Top Products
8-55
7. Reinstall the bulb holder by pushing it in
and turning it clockwise.
Reinstall the bulb holder cover and the
cover at the rear of the headlight.
NOTICE: Make sure the headlight bulb
holder cover is securely fitted over the
bulb holder and seated properly.
8. Close the hood.
9. Adjust the headlight beam if necessary.
EVU00990
Headlight beam adjustment
NOTICE
It is advisable to have a Yamaha dealer
make this adjustment.
To raise the beam, turn the adjusting screw in
direction a.
To lower the beam, turn the adjusting screw in
direction b.
1. Headlight beam adjusting screw
EE.book Page 55 Thursday, September 6, 2007 4:28 PM