Filter
Top Products
8-26
3. Install the spark plug and tighten it to the
specified torque. If a torque wrench is not
available when you are installing the
spark plug, a good estimate of the correct
torque is one-quarter to one-half turn
past finger tight. Have the spark plug
tightened to the specified torque as soon
as possible.
4. Install the spark plug cap.
5. Reinstall the console.
5B410016
Cleaning the air filter element
There is a check hose at the bottom of the air
filter case and at the bottom of the air duct un-
der the case. If dust or water collects in a
check hose, empty the hose and clean the air
filter element and air filter case.
1. Air filter case check hose
Tightening torque:
Spark plug:
12.5 Nm (1.25 m·kgf, 9.0 ft·lbf)
1
EE.book Page 26 Thursday, September 6, 2007 4:28 PM