Filter
Top Products
8-15
NOTICE
● In order to prevent clutch slippage
(since the engine oil also lubricates the
clutch), do not mix any chemical addi-
tives with oil. Do not use oils with a die-
sel specification of “CD” or oils of a
higher quality than specified. In addi-
tion, do not use oils labeled “ENERGY
CONSERVING II” or higher.
● Make sure that no foreign material en-
ters the crankcase.
1. “CD” specification
2. “ENERGY CONSERVING II”
13. Start the engine, and then let it idle for
several minutes while checking it for oil
leakage. If oil is leaking, immediately turn
the engine off and check for the cause.
14. Turn the engine off, wait at least ten min-
utes, and then check the oil level and cor-
rect it if necessary.
15. Reinstall the console.
1
2
EE.book Page 15 Thursday, September 6, 2007 4:28 PM