Filter
Top Products
8-45
EVU00940
Wheel installation
1. Install the wheel and the nuts.
● The arrow mark on the tire must
point toward the rotating direction of
the wheel.
● Tapered nuts are used for both the
front and rear wheels. Install the nuts
with their tapered side towards the
wheel.
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts to the specified
torque.
WARNING
Do not reverse the rims on the Rhino to
widen the track width. Installing wheels
improperly increases the risk of wheel fail-
ure and accidents.
1. Arrow mark
1. Tapered nut
EE.book Page 45 Thursday, September 6, 2007 4:28 PM