Filter
Top Products
8-21
9. Install the differential gear case guard by
installing the bolts and the collars, and
then tightening the bolts to the specified
torque.
5B410015
Coolant
The coolant level should be checked before
each ride.
Checking the coolant level
1. Park the vehicle on a level surface.
2. Check the coolant level in the coolant
reservoir when the engine is cold as the
coolant level varies with engine tempera-
ture. The coolant should be between the
minimum and maximum level marks.
1. Coolant reservoir cap
2. Maximum level mark 3. Minimum level mark
Tightening torque:
Differential gear case guard bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
1
2
3
EE.book Page 21 Thursday, September 6, 2007 4:28 PM