Filter
Top Products
8-19
5B410014
Differential gear oil
Checking the differential gear oil level
1. Park the vehicle on a level surface.
2. Remove the differential gear oil filler bolt
and check the oil level. It should be up to
the brim of the filler hole. If the level is
low, add sufficient oil of the recommend-
ed type to raise it to the specified level.
NOTICE: Be sure no foreign material
enters the differential gear case.
1. Differential gear oil filler bolt
2. Correct oil level 3. Differential gear oil
3. Reinstall the differential gear oil filler bolt,
and then tighten it to the specified torque.
Changing the differential gear oil
1. Park the vehicle on a level surface.
2. Remove the differential gear case guard
by removing the bolts and the collars.
1. Differential gear case guard
2. Bolt and collar (× 7)
1
2
3
1
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
1
2
2
2
EE.book Page 19 Thursday, September 6, 2007 4:28 PM