Yamaha YFM25RSEY Automobile User Manual


 
CABLE ROUTING
2-42
1. Battery
2. CDI unit
3. Band
4. Starter relay lead
5. Starter relay
6. Taillight lead
7. Battery negative lead
8. AC magneto coupler
9. Starter motor lead
10.Headlight relay
11.Neutral relay
12.Damper
13.CDI unit lead
14.Relay lead
A. Route the starter relay lead under the
starter motor lead.
B. After connecting the battery negative lead,
push the sag in the box.
C. After connecting the wire harness and
each electric part, the length between the
air filter and AC magneto coupler should
be 185 mm (7.28 in) on straight line.
D. Clamp the taillight lead.
E. Do not clamp.
F. Set the insulator lock on the wire harness
behind the fixed point.
G. Insert the starter relay all the way into the
rib on the air filter side.
H. There is no particular order in placing each
lead.
I. Insert each relay all the way into the rib on
the air filter side.