Filter
Top Products
PICKUP COIL ROTOR AND STARTER CLUTCH
5-48
4. Install:
• Stator coil “1”
•Pickup coil “2”
5. Tighten:
• Stator coil bolts “3”
• Pickup coil bolts “4”
• Left crankcase cover bolt “5”
6. Install:
• Dowel pin
• Crankcase cover gasket
7. Install:
• Left crankcase cover
8. Tighten:
• Crankcase cover bolts “1”–“9”
TIP
Tighten the bolts in stages and in a crisscross
pattern as shown.
9. Install:
• Starter idle gear 1
•Shaft
10.Install:
• O-ring
• Starter idle gear cover
11.Tighten:
• Starter idle gear cover bolt
Stator coil bolt
10 Nm (1.0 m·kg, 7.4 ft·lb)
LOCTITE®
Pickup coil bolt
10 Nm (1.0 m·kg, 7.4 ft·lb)
LOCTITE®
Left crankcase cover bolt
7 Nm (0.7 m·kg, 5.2 ft·lb)
LOCTITE®
New
Crank case cover bolt
M6 × 30 mm: “1”–“5”
10 Nm (1.0 m·kg, 7.4 ft·lb)
M6 × 45 mm: “6”
10 Nm (1.0 m·kg, 7.4 ft·lb)
M6 × 40 mm: “7”–“9”
10 Nm (1.0 m·kg, 7.4 ft·lb)
Starter idle gear cover bolt
10 Nm (1.0 m·kg, 7.4 ft·lb)
New