Filter
Top Products
CABLE ROUTING
2-34
1. Rear brake reservoir
2. Rear brake light switch
3. Clip
4. Rear brake reservoir hose
5. Rear brake master cylinder
6. Parking brake cable
7. Rear brake hose
8. Rear brake caliper
A. Make sure that the end of the clip is facing
downward.
B. Set the rear brake reservoir hose with the
positioning yellow paint mark pointing
down.
C. Install the rear brake hose in the direction
shown in the illustration.
D. Insert the rear brake hose until it contacts
the projection.
E. Make sure that the end of the clip is facing
outward.
F. Install the rear brake reservoir hose, mak-
ing sure to face the white paint mark out-
ward.
G. Insert the rear brake reservoir hose until it
contacts the projection.
H. When installing the rear brake hose, make
sure that the metal part on the rear brake
Inlet hose is touching the stopper of the
rear caliper.