Filter
Top Products
05 Locks and alarm
105
Battery in remote control
05
Weak remote control battery
When the battery runs down and full func-
tionality cannot be guaranteed, the informa-
tion symbol illuminates and the
REMOTE
BATTERY LOW VOLTAGE
appears on the
display.
Replacing the remote control battery
If the locks repeatedly fail to respond to sig-
nals from the remote control at a normal
distance, the battery should be replaced
(type CR 2450, 3 V).
– Place the remote control with the keypad
downward and prise up the cover using a
small screwdriver.
– Remove the cover.
– Carefully examine how the battery’s
+ and – sides are fitted (there is a diagram
under the cover).
– Prise away and replace the battery. Avoid
touching the battery and its terminals with
your fingers.
– Refit the cover and press it in.
Dispose of the old battery in an environmen-
tally-responsible manner.
G019406