Filter
Top Products
06 Starting and driving
137
BLIS – Blind Spot Information System (option)
06
BLIS system message
Cleaning
In order to work most effectively the BLIS
camera lenses must be clean. The lenses can
be cleaned with a soft cloth or damp sponge.
Clean the lenses carefully so that they are not
scratched.
Limitations
In some situations the BLIS indicator lamp
may illuminate despite there being no other
vehicle within the blind spot.
Here are several examples of situations
where the BLIS indicator lamp may illuminate
even if there is no other vehicle within the
blind spot.
Reflection from shiny wet road surface.
Own shadow on large, light, smooth surface,
e.g. noise barrier or concrete road surface.
Low sun in the camera.
Text on the
display
Specification
BLIND-SPOT INFO
SYSTEM ON
BLIS system on.
BLIS FUNCTION
REDUCED
The BLIS camera is
disrupted by fog or
strong sunlight, for
example, shining
directly into the
camera.
The camera resets
itself when the envi-
ronment has returned
to normal.
BLIND-SPOT SYST
CAMERA
BLOCKED
One or both cameras
blocked.
Clean the lenses.
BLIND-SPOT SYST
SERVICE
REQUIRED
Blind spot syst.
disengaged.
Contact an authorised
Volvo workshop.
BLIND-SPOT INFO
SYSTEM OFF
BLIS system off.
IMPORTANT
Repair of the BLIS system components
must only be performed by an authorised
Volvo workshop.
IMPORTANT
The lenses are electrically heated to melt ice
or snow. If necessary, brush snow away
from the lenses.
NOTE
If the BLIS indicator lamp illuminates on iso-
lated occasions despite there being no
other vehicle within the blind spot then this
does not mean that a fault has arisen in the
system.
In the event of a fault in the BLIS system
the display shows the text
BLIS Serv.
required
.
G018176
G018177
G018178