Filter
Top Products
10 Infotainment system
214
Radio functions
10
Display of programme type
The programme type of the current station
can be shown on the display.
Activating/deactivating display
–Press MENU and then ENTER.
– Scroll to
PTY and press ENTER.
– Scroll to
Show PTY and press ENTER.
Radio text
Some RDS stations transmit information on
programme content, artists, etc. This infor-
mation can be shown on the display.
Activating/deactivating radio text
–Press MENU and then ENTER.
– Scroll to
Radio text and press ENTER.
Automatic frequency update – AF
The AF function selects one of the strongest
transmitters for a set station. The radio may
sometimes need to search through the entire
FM wavelength to find a strong transmitter. If
this occurs, the radio mutes and
PI seek
Exit to cancel
appears on the display.
Activating/deactivating AF
– Press MENU and then ENTER.
– Scroll to
Advanced radio settings and
press ENTER.
– Scroll to
AF and press ENTER.
Regional radio programmes – REG
This function causes the radio to
continue with a regional transmitter
even if its signal strength is low.
REG indicates that the function is
active. The regional function is normally
deactivated.
Activating/deactivating REG
– Press MENU and then ENTER.
– Scroll to
Advanced radio settings and
press ENTER.
– Scroll to
Regional and press ENTER.
Enhanced Other Networks – EON
The EON function is particularly useful in
urban areas with many regional radio sta-
tions. It allows the distance between the car
and the radio station transmitter determine
when programme functions should interrupt
the current audio source.
• Local – interrupts only if the radio station
transmitter is close.
•
Distant
1
– interrupts if the station trans-
mitter is far away, even if there is a lot of
static.
•
Off – no interruption for programmes from
other transmitters.
Activating/deactivating EON
– Press MENU and then ENTER.
–Scroll to
Advanced radio settings and
press ENTER.
–Scroll to
EON and press ENTER.
–Scroll to
Local, Distant or Off and press
ENTER.
Resetting RDS functions
Resets all radio settings to the original fac-
tory settings.
– Press MENU and then ENTER.
–Scroll to
Advanced radio settings and
press ENTER.
–Scroll to
Reset all and press ENTER.
Volume control, programme types
The interrupting programme form is heard at
the volume selected for such. If the volume
level is adjusted during the programme inter-
ruption, the new level is saved until the next
programme interruption.
NOTE
Not all radio stations support this function.
1
Default/Factory setting