Filter
Top Products
Example:
Note: • “TrapFULL” appears on the display with an error
tone if memory space for marking “Traps” is full.
• To clear the marked location, press the
SELECT/TRAP button while driving within the Level
3 “Trap” area. “CLR Trap” appears on the display.
Mute Operation
The detector changes its alert tones when the audio mute feature
is activated.
Press the MUTE button to indicate the mute mode set presently.
To toggle the mode, press the MUTE button again within
2 seconds.
When the detector receives radar signals with the mute mode on,
it reduces the volume of the alert tones after emitting normal
alert tones for 3 seconds. Also, the alert tones emitted when
approaching a Trap Point or Mark Loc. are reduced in volume
with the default for mute mode is OFF.
Note: The default for mute mode is off.
Audio/Dimmer Operation
Press the CITY and the MUTE buttons simultaneously to select
one of the following modes.
Dimmer Off: Display lights normally
Dimmer On Middle: Display is dimmed
Dimmer On Low: Display is at its darkest level
Note: The default mode for dimmer is off.
24
[ MUTE ]SW
GREEN
GREEN
GREEN
GREEN
Level 1
US076Z (GPSRD) OM 9/4/01 13:39 Page 24