Filter
Top Products
Note: • To exit from the Menu function, press the EXIT/ALERT
key. If no key is pressed within 30 seconds, the
GPSRD will return to the display screen.
• If the detector cannot receive signals from the GPS
satellite, “-” and “?” may appear on the display.
1. Navigate
To enter into this mode, select “Navigate” using the ▲ or ▼
keys. Press the SELECT/TRAP key. Use the ▲ or ▼ keys to select
the location you wish to program. Once the desired location is
displayed press the SELECT/TRAP key to program the location.
The display will confirm your choice with the readout of
“Selected”. The detector will display the distance, expected
necessary time, and etc. from the location where you are now.
15
GREEN
GREEN
GREEN
[ ]SW
[ ]SW
GREEN
[ ]SW
[ ]SW
GREEN
[ ]SW
[ ]SW
GREEN
[ ]SW
[ ]SW
GREEN
[ ]SW
[ ]SW
GREEN
[ ]SW
[ ]SW
GREEN
[ ]SW
[ ]SW
GREEN
[ ]SW
[ ]SW
[SELECT/TRAP]SW
[SELECT/TRAP]SW
"Menu Mode"
[EXIT/ALERT]SW
[ ]SW[ ]SW
RED
No GPS Satellite Signals
US076Z (GPSRD) OM 9/4/01 13:38 Page 15