Filter
Top Products
• Do not leave the unit in direct sunlight or in the glove
compartment of a closed car for long periods of time, as
extreme changes in temperature may cause internal damage.
Also, removing the unit from the windshield makes you less
susceptible to break-in and theft.
Adjusting the Windshield Mounting Clip
1. The metal portion of the
bracket locks into the
plastic portion at three
different positions. These
positions can be used for
vehicles with different
vertical windshield angles.
The back position can be
used for vehicles with
windshields that are
slanted back.
2. For optimum laser
detection, bend the angled
portion of the windshield
mounting bracket so that
the GPSRD is parallel to
the road surface. Be sure
the GPSRD is mounted so
it is free of obstructions
from seat backs, rear view
mirror, sun visors, or the
ceiling of the automobile.
There must be a clear 360º
line of sight to the outside
of the vehicle.
To mount the GPSRD:
1. Insert the windshield clip into the GPSRD.
2. Place the bracket and the GPSRD in the proper location on
the windshield of your vehicle, and press the suction cups
firmly against the windshield.
10
US076Z (GPSRD) OM 9/4/01 13:38 Page 10