Filter
Top Products
Example: X Band
Note: • The alert tones for the radar, laser, and SWS are all
different.
• The warning feature won’t be functional if you are
driving less than 10 MPH.
City/Highway Mode
You can change the detector’s sensitivity to activate its warning
feature according to your driving area.
Press the CITY key and
the current setting level
will appear on the
display. To change the
level, press the CITY key
again within 2 sec. The
level is set at 0
(Highway) initially and
you may choose to increase the city mode from level 1 to 4
based on how sensitive you wish to set the detector.
Level 0 : This is the most sensitive setting. The
(Highway) detector will be more sensitive to distant
signals, but it also is more likely to false alarms.
Level 1~4 : The detector filters out weaker signals to reduce
(City) false alarms, however you will not receive Audio
Warnings until you get closer to the source.
Note: Setting the city level to 4 greatly reduces the range for
receiving an audio alert.
20
GREEN
GREEN
Signal LV 1
Signal LV 2
Signal LV 3
Signal LV 4
Signal LV 5
Signal LV 6-7
GREEN
GREEN
GREEN
GREEN
GREEN
[ CITY ]SW
[ CITY ]SW
[ CITY ]SW
GREEN
GREEN
US076Z (GPSRD) OM 9/4/01 13:39 Page 20