Filter
Top Products
Page 76
I Have a Question
4) If the adjustment lock won’t go back down, the bracket joint is
too tight. Twist the adjustment lock one or two turns counter-
clockwise and try to ip it down again.
Why is it that...?
The ScReen iS BluRRy And hARd To ReAd
Dirt and oils from your ngers can stay on the touchscreen.
Periodically clean the touch screen with a lint free cloth dampened
with water only. If the screen remains dirty, try a mild soap solution
or a cleaning spray designed for electronics.
Do not use ammonia on the screen, and never immerse the
device in water.
i cAn’T find A locATion on The mAP
Newer addresses may not have existed when the map software
was created. Check www.uniden.com for the latest maps.
Some BuTTonS ARe GRAyed ouT
If a button’s function is not available for some reason the button will
be grayed out. You’ll see this on the input screens, where letters
that don’t match a record in the map database will be grayed out so
you don’t misspell anything.