Filter
Top Products
AgGPS 332 GPS Receiver User Guide 55
Configuring the Receiver 5
1. Navigate to the Units screen:
2. Press 3 to select the Units field.
3. Press 1 or 2 until the required unit is displayed.
4. Press 4 to select it and save the changes.
5. Press 5 to return to the Display Options menu.
6. Press 5 again to return to the Home screen.
Locking the Configuration menus
To prevent unauthorized changes to the configuration, you can lock the
Configuration menus:
1. Navigate to the Lock Display Cfg screen.
2. Press 4 to display the Enter Password screen. The cursor is
active on the first digit:
3. Use the last five numbers of the receiver serial number as the
password (“passcode”).
4. Press 1 or 2 until the first digit of the serial number appears.
5. Press 3 to select the next digit. Repeat step 3 until all five digits
are entered.
6. Press 4 to save the changes.
7. The
Valid Password message appears, and the Configuration
menus are no longer displayed when you navigate the menus.
If the message
Invalid Password appears, enter the password
again.