Filter
Top Products
3 Connecting the Receiver
24 AgGPS 332 GPS Receiver User Guide
When routing the cable from the receiver to the external device, avoid:
• sharp objects
• kinks in the cable
• hot surfaces (exhaust manifolds or stacks)
• rotating or moving machinery parts
• sharp or abrasive surfaces
• door and window jams
• corrosive fluids or gases
When the cable is safely routed and connected to the receiver, use
tie-wraps to secure it at several points, particularly near the base of the
receiver, to prevent straining the connection. Coil any slack cable,
secure it with a tie-wrap, and tuck it into a safe place.
The external device may have to be configured to work with the AgGPS
receiver. The configuration tools for the external device should be
provided with the device. For more information about configuring the
receiver, see Chapter 5, Configuring the Receiver. For information
about connecting a particular external device, refer to the manual for
that device or contact your local Trimble Reseller.