Filter
Top Products
AgGPS 332 GPS Receiver User Guide 105
Third-Party Interface Requirements D
D.2 Hardware
The following table lists the interface requirements for connecting an
AgGPS receiver to third-party hardware.
Company Hardware Protocol NMEA
messages
Baud
rate
Other Pos rate Cable P/N
required
Notes
Ag Leader Insight NMEA GGA, VTG 9600,
or
19.2K
8-N-1 5Hz 30945,
40947-18,
46441
Requires Ag Leader
adapter cable, P/N
2000819, or T-P/N
18532, or standard
serial cable with null
modem.
Ag Leader PF
Advantage
NMEA GGA, VTG 4800 8-N-1 1 Hz 30945,
40947-18,
46441
Requires Ag Leader
adapter cable, P/N
2000929. Connect to
Aux1 port on
PFAdvantage.
Ag Leader PF3000
Yield
Monitor
NMEA GGA, VTG 4800 8-N-1 1 Hz 39903 Do not set position
output faster than
1Hz.
Ag Leader PF3000Pro
Monitor
without
GPS
NMEA GGA, VTG 4800 8-N-1 1 Hz 30945,
40947-18,
46441
Requires Ag Leader
adapter cable, P/N
2000929.
Connect to Aux1 port
on PF3000Pro.
Ag Leader Yield
Monitor
2000
NMEA GGA, VTG 4800 8-N-1 1 Hz 39903 P/N 39903 replaces
cable P/N 30660,
Do not set position
output faster than
1Hz.
AGCO FieIdStar
Yield
Monitor
(1997–mid
2001)
NMEA GGA, VTG,
GSV, GSA @
1 Hz, VTG
@ 5 Hz
9600 8-N-1 1 Hz, 5 Hz 30945,
40947-18,
46441
FieIdStar Com Unit is
DB9 male.
Requires a null
modem RS-232
adapter.
AGCO FieIdStar
Yield
Monitor
(2003 or
later)
NMEA GGA, VTG,
GSV, GSA @
1 Hz, VTG
@ 5 Hz
9600 8-N-1 1 Hz, 5 Hz 30945,
40947-18,
46441
Requires AGCO
adapter cable, P/N
71395221 (DB9 male
to 9 pin circular AMP
connector).
AGCO FieIdStar
Yield
Monitor
(mid 2001–
2002)
NMEA GGA, VTG,
GSV, GSA @
1 Hz, VTG
@ 5 Hz
9600 8-N-1 1 Hz, 5 Hz 30945,
40947-18,
46441
FieIdStar Com Unit is
DB9 female.
Requires a null
modem RS-232
adapter plus gender
changer, or a male-
male null modem
adapter.
AgNav Ag-Nav2 NMEA GGA, VTG 9600,
19.2K
8-N-1 5 Hz 30945
Auto
Control,
Inc.
AutoCal NMEA VTG 4800 8-N-1 5 Hz 30945 Adapter cable is
purchased from Jim
Graves, Auto Control
Inc., Houma, LA