Filter
Top Products
4 Getting Started
44 AgGPS 332 GPS Receiver User Guide
4.2 Updating the Firmware
To ensure that the receiver and office computer connect, when you are
ready to update the firmware, do one of the following:
• If you use a Windows CE or pocket PC device with the computer,
make sure that Microsoft ActiveSync
®
technology is disabled
from using the COM port on the computer.
• If you use a Palm Pilot with the computer, make sure that the
Palm Synchronization program is disabled from using the COM
port on the computer.
To update the receiver firmware when a new version is released:
1. Download the upgrade files.
2. Install the FlashLoader200 utility.
3. Connect the receiver to an office computer.
4. Upgrade the firmware from the office computer, using the
upgrade files.
For full details of how to do this, refer to the Release Notes provided
with your receiver firmware.
If you have problems when you update the firmware, see Chapter 6,
Troubleshooting. For further assistance, contact your local Trimble
reseller.