Filter
Top Products
TD - Series
- 32 -
TD Series Digital Solid State Soft Starter 48 - 1250A
F083 = Date Stamp, Fault # 3
Factory Setting = 01.01
Range = MM.DD where MM = 01 - 12 and DD = 01 - 31
Displays date time fault in F081 was detected.
Functions F084 through F087 display information from the Run Time /
Elapsed Time meter and Run-Cycle counter. Run time includes Accel,
Run, Decel, and Jog operations.
F084 = Run Time, Hours
Factory Setting = 0000
Range = 000.9 - 999.9 hours
Run counts in excess of 999.9 are recorded in F085.
F085 = Run Time, K Hours
Factory Setting = 0000
Range = 0000 - 9999 K hours
0001 in readout means a run time of 1,000 hours.
F086 = Run Counts
Factory Setting = 0000
Range = 0000 - 9999
Run counts in excess of 9999 are recorded in F087.
F087 = Run Counts, 10K Times
Factory Setting = 0000
Range = 0000 - 9999, 10 thousand times
0001 in readout means a run count of 10,000 operations.