Filter
Top Products
96
Replacing Engine Coolant :
The cooling system should be completely drained and refilled with new coolant
at specified intervals
1. Touch the engine and radiator only after ensuring that they are cold.
2. Remove the auxiliary tank cap.
3. Loosen the drain plug at the bottom of the radiator.
4. Remove the auxiliary tank from its holder, drain the coolant and refit it.
5. Flush the radiator by using reverse flow i.e. radiator drain plug to auxiliary
tank with clean water and close the drain plugs.
6. Pour the premixed ready to use engine coolant into the radiator until it is
full.
7. Fill the auxiliary tank upto the 'MAX' mark and fit the cap.
8. Ensure that there is no leakage in the system.
Do not touch the engine and radiator when hot.
MAINTENANCE & CAR CARE Engine Cooling System