123
Head Lamps :
The head lamps are provided with halogen lamps of H4 type with
double filament for providing straight ahead illumination of the road
for long distance or a dip beam which illuminates the road
immediately ahead for short distance visibility. Use dip beam to
avoid inconvenience / blinding the drivers of oncoming vehicles.
The head lamps must be properly aligned in order to obtain maximum
road illumination and reduced glare for oncoming traffic. It is
recommended to check alignment of head lamp beams periodically.
Focusing of Head Lamps & Front Fog Lamps :
Provision is made for focusing of head lamps and front fog lamps.
This should be done at the Authorised Service outlets.
Head Lamp Bulb Replacement :
• Switch 'OFF' the head lamps & ensure that the bulb is not hot.
• Open the bonnet and remove the lamp connector from the head
lamp bulb.
• Remove rubber cap. Unlock the locking clip and take out the
bulb from the holder. This should be done carefully, otherwise it
may lead to breakage of the bulb holder / holding clip.
• Note the instructions on the bulb carton.
MAINTENANCE & CAR CARE Head Lamps
Fog Lamp
Head Lamp