Filter
Top Products
79
Engine Coolant Level :
The coolant level is visible through the translucent reservoir. It should
be between max. & min. marks. If it seems less, add premixed
coolant into the auxiliary tank upto the max. mark. Put the cap
back properly.
Never remove the filler cap when the engine is hot. Use
only branded premixed ready to use coolant.
In case of an emergency, normal water can be used, but the system
should be flushed & filled with proper coolant mixture at the earliest.
Brake Fluid Level :
The level of the brake fluid must be between the min. & max. marks
on the side of the brake fluid container. If the level falls below the
min. mark, add recommended brake fluid. (Refer chapter - Fuels,
coolants & lubricants)
In case of spongy or hard pedal or low brake efficiency, please
contact the nearest Authorised Service outlet.
1. Do not allow brake fluid to make contact with the skin or
eyes.
2. Do not allow brake fluid to splash or spill on the paint
surface as it will damage the paint. In case of spillage,
wipe it off immediately.
STARTING & DRIVING Engine Coolant & Brake Fluid Level
1
2
1. Engine Coolant filling cap
2. Brake Fluid filling cap