Filter
Top Products
124
Replace the bulb with a new one of the same type with right
orientation in the holder.
• Lock the clip, fit the rubber cap and fix the connector.
• Switch 'ON' the head lamps and check the lighting.
Do not clean or touch the head lamp reflector as it will
damage the mirror finish of the surface.
The horizontal and vertical adjustment screws are located on the
back of the reflector.
Precise adjustment can be carried out only in the authorised
workshops.
When replacing the head lamp bulb, handle it by gripping the cap.
Protect the glass from contact with your skin or hard object. If you
touch the glass, clean it with spirit & a clean cloth. After replacement
of the bulb in any emergency get the head lamp adjustment done
at an Authorised Service outlet at the earliest.
Halogen head lamp bulbs get very hot when illuminated.
Oil, perspiration or a scratch on the glass can cause the
bulb to break due to the heat.
MAINTENANCE & CAR CARE Head Lamps