Filter
Top Products
102
Transaxle Oil :
Checking of Oil Level :
1. Clean the oil level plug and the surrounding area.
2. Remove the oil level plug and check whether oil is dripping out.
The oil level must not be below the filler plug.
Add oil to bring it to the required level.
3. Tighten the oil level plug to 3 - 4 mkg. torque.
Changing Oil in Transaxle :
1. Let the engine idle for about 5 min. in neutral gear, so that the
Transaxle is warmed up.
2. Clean the oil level plug, drain plug and surrounding area.
3. Place a container under the transaxle to collect the oil.
4. Remove the oil level plug.
5. Remove the drain plug and let the oil drain out fully.
6. Refit the drain plug with a new sealing washer. Tighten the oil
drain plug and fill new recommended oil through the oil level
plug. Tighten both the oil drain plug and oil level plug (with new
sealing washer) to 3 - 4 mkg. torque.
MAINTENANCE & CAR CARE Transaxle
Oil Filler / Level Plug
Reverse Light
Switch
Drain Plug