Filter
Top Products
57
E. Air Circulation Switch :
• In HVAC version to put air circulation mode in
recirculation, press switch 'E'. The indicator lamp will
show air circulation is in recirculation.
To put vehicle in Fresh mode release switch 'E'. Indicator
lamp will be 'OFF'.
• In A.C. version, air circulation mode can be selected
by rotating knob 'E'.
Fresh Recirculation
• In recirculation mode, air inside the vehicle is circulated
again and again. In Fresh mode, air is taken from
atmosphere and circulated in the vehicle.
Recirculation mode can be used
• While driving in dusty condition
• To avoid traffic pollution
• To get quick cooling/heating as required.
Whenever discomfort is felt switch air circulation mode to
fresh.
Notice : The A.C. can be switched `ON' only if the blower
is 'ON' and engine is running. When A.C. is switched
'ON' engine idling RPM increases marginally, to adjust
to the A.C. compressor load. When desired temperature
is achieved A.C. trips 'OFF' automatically.
Air Recirculation
Knob
E
Indicator
Notice : The A.C. compressor gets switched 'OFF'
automatically when engine gets overheated. The A.C. is
automatically switched 'ON' when the engine cools down.
Normal Cooling :
A.C. - ON
Knob 'B' - Desired speed position
Knob 'C' - Towards face
Switch 'E' - Suitably as explained
Quick Cooling :
If your car is left in the sun with window closed inside
temperature increases.
BEFORE DRIVING Heating, Ventilation & Air Conditioning