Filter
Top Products
PI-7
PRE-DELIVERY INSPECTION
Pre-delivery Inspection
Operate the lever (A) and check that the hood is
opened normally. Then support the hood with hood
stay.
13.BATTERY
Check the battery terminals to make sure that no
rust or corrosions due to fluid leaks are found.
Check that the battery caps are securely tightened.
14.BRAKE FLUID
Check the brake fluid amount. If the amount is in-
sufficient, carry out a brake line test to identify
brake fluid leaks and check the brake operation. Af-
ter that, refill the brake fluid tank with the specified
type of fluid.
15.ENGINE OIL
Check the engine oil amount. If the amount is insuf-
ficient, check that no leaks are found. Then, add
the necessary amount of the specified engine oil.
16.TRANSMISSION FLUID
Check the transmission fluid amount. If the amount
is insufficient, check that no leaks are found. Then,
add the necessary amount of the specified fluid.
(A) Cap
(B) Upper level
(C) Lower level
PI-00151
(A)
PI-00012
(A)
(B)
(C)
(A) Oil level gauge
(B) Engine oil filler cap
(C) Upper level
(D) Lower level
(E) Approx. 1.0 2 (1.1 US qt, 0.9 Imp qt)
(A) Oil level gauge
(B) Upper level
(C) Lower level
LU-00138
(A)
(B)
(C)
(D)
(E)
PM-00030
(B)
(C)
(A)