Filter
Top Products
PI-5
PRE-DELIVERY INSPECTION
Pre-delivery Inspection
4) Press the driver’s side power door lock switch to
unlock side. Check that all doors including rear
gate are unlocked.
6. CHECK DOUBLE LOCK OPERATION
1) Fully open all the windows.
2) Remove the key.
3) Lock all the doors using the door key cylinder or
transmitter.
4) Verify that all the doors including rear gate are
not unlocked when pressing power door lock switch
to unlock side.
5) Verify that the door is not opened when operat-
ing door lock knob to unlock position and pulling in-
ner remote. Perform the same check for other
doors.
6) Check that all the doors are unlocked when door
is unlocked using door key cylinder or transmitter,
or ignition switch is turned to ON.
7. CHECK THE OPERATION OF CHILD
SAFETY LOCKS
1) Set the child safety lock on both rear doors to the
lock positions.
2) Close the rear doors completely.
3) Check that the lock levers of the rear doors are in
the unlock positions. Then, pull the inner remotes
of the rear doors to ensure that the doors will not
open.
4) Next, pull the outside door handles of the rear
doors to ensure that the doors will open.
8. CHECK THE TRUNK LID FOR OPEN/
CLOSE OPERATIONS
1) Operate the trunk lock release lever and verify
that the trunk lid opens.
2) Using the key, open the trunk lid several times to
check for normal operation.
3) Open and close the trunk lid several times for
smooth movement.
4) Set the trunk lid release lever to the cancel posi-
tion, and check that the trunk lid can only be
opened with the key.
PI-00143
(A) Unlock
(B) Lock
(C) Child safety lock
PI-00084
(A)
(B)
(C)
PI-00149