Filter
Top Products
PM-26
PERIODIC MAINTENANCE SERVICES
Transmission Gear Oil
15.Transmission Gear Oil
A: REPLACEMENT
1. MANUAL TRANSMISSION
1) Drain the gear oil by removing drain plug.
NOTE:
• Before starting work, cool off the transmission
gear oil well.
• If transmission gear oil adheres to the exhaust
pipe, wipe it off completely.
5MT
6MT
2) Replace the gasket with new one, and then tight-
en it to the specified torque.
Tightening torque:
5MT
70 N·m (7.1 kgf-m, 51.6 ft-lb)
6MT (Oil pan side):
44 N·m (4.5 kgf-m, 32.5ft-lb)
6MT (Clutch housing side):
70 N·m (7.1 kgf-m, 51.6 ft-lb)
3) Fill transmission gear oil through the oil level
gauge hole up to the upper point of level gauge.
NOTE:
Each oil manufacturer has its base oil and addi-
tives. Thus, do not mix two or more brands.
Gear oil capacity:
FWD model
3.3 L (3.5 US qt, 2.5 Imp qt)
AWD model (5MT single range model):
3.5 L (3.7 US qt, 3.1 Imp qt)
AWD model (5MT dual range model):
4.0 L (4.2 US qt, 3.5 Imp qt)
6MT:
4.1 L (4.3 US qt, 3.6 Imp qt)
(A) Drain plug (Oil pan side)
(B) Drain plug (Clutch housing side)
PM-00029
(A)
(B)
MT-00450
(A) Oil level gauge
(B) Upper level
(C) Lower level
PM-00030
(B)
(C)
(A)