Filter
Top Products
PI-4
PRE-DELIVERY INSPECTION
Pre-delivery Inspection
1. APPEARANCE CHECK
• If the vehicle is covered with protective coating,
visually check the vehicle body for damage and
dents.
• If there is no protective coating, check the body
paints for small areas of damage or stains and re-
pair as necessary.
• Check the window glass, door glass, and lights
for any cracks or damage and repair or replace the
parts as necessary.
• Check the plated parts, such as the grilles and
door knobs, for damage or loss of gloss and repair
or replace the parts as necessary.
2. TIRE CHECK
• Check the tires for damage, abnormal condi-
tions, and dents on the wheels.
• Check the tire size, spare tire and tire air pres-
sure described on the tire air pressure label (driv-
er’s side).
3. FUSE INSTALLATION
A vehicle just delivered has no fuse for the back-up
circuit to prevent battery discharge. Attach a 15 A
fuse (A) as shown in the figure.
4. CONNECTION OF AIR CONDITIONER
HARNESS
A vehicle just delivered has its air conditioner har-
ness disconnected to protect the air conditioner
compressor. Connect the harness as shown in the
figure.
5. CHECK THE DOORS FOR LOCK/UN-
LOCK AND OPEN/CLOSE OPERATIONS
1) Using the key, lock and unlock the door several
times to check for normal operation. Open and
close the door several times for smooth movement.
2) Close the driver’s door completely, and place the
door lock knob (A) to the lock position. Then pull in-
ner remotes (B) to ensure that doors will not open.
For other doors, place the door lock knob (A) to the
lock positions and then pull the inner remote to en-
sure that the doors will not open.
3) Press the driver’s side power door lock switch to
lock side. Check that all doors including rear gate
are locked.
PI-00001
PI-00139
(A) Unlock
(B) Lock
(A) Door lock knob
(B) Inner remote
PI-00140
(A)
(B)
PI-00004
(A)
(B)
PI-00142