Filter
Top Products
79
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Front Drive
Axle U Joints
Grease + Locate grease fitting and grease
with grease gun.
Every 3 mont hs
or 50 hrs
Rear Axle
Bearing
Grease** Locate fitting on eccentric and
grease with g rease gun.
Every 3 mont hs
or 50 hrs
Swing Arm
Bushings
Grease** Locate fitting on swing a rm and
grease with g rease gun.
Monthly or at 2 0
hrs
Middle Axle
Bearings
Grease* Locate fitting on eccentric and
grease with g rease gun.
Every 3 mont hs
or 50 hrs
Center
Swing Arm
Housing
Grease* Locate fitting on swing arm
housing and grease with
grease gun.
Every 3 mont hs
or 50 hrs
Rear Strut Grease* Locate f itting on rear strut
and grease with g rease gun.
Every 3 mont hs
or 50 hrs
* More often under severe use, such as wet o r dusty conditions
** Grease conforming to NLGI No. 2, such as Conoco Superlube M or
Mobilegrease Special
+ Use Polaris Premium U-Joint Lube
NOTE: Hours are based on 10 mph average.
Rear Axle
Bearing
Middle Axle Bearings
Swing Arm
Bushings
Rear Strut
Center Swing Arm
Housing
U Joint