Filter
Top Products
100
MAINTENANCE AND LUBRICATION
Adjustments
Carburetor/Engine Idle RPM Adjustment
Recommended engine idle RPM is 1200
+/- 200. If the engine idle speed is not
satisfactory, and all other conditions are
favorable, the carburetor can be adjusted
as follows:
If the engine idle speed is not satisfactory,
and all other conditions are favorable, the
carburetor can b e adjusted as follows:
1. Warm up the engine by running the ve-
hicle approximately five minutes.
2. P l ace the transmission in gear with the parking brake applied.
3. Adjust the carburetor idle screw in or out until the desired idle RPM
is reached. Turning the screw in (clockwise) will raise RPM. Turning
the screw out (counterclockwise) will lower RPM.
Idle Screw