Filter
Top Products
114
MAINTENANCE AND LUBRICATION
Lights - Adjustment - Replacement
Taillight/Brakelight Lamp Replacement
If the t aillight/brakelight does not
work the lamp may need to be
replaced.
1. Remove the taillight assembly by
removing the two screws securing
it to the vehicle.
2. Twist the lamp harness 1/4 turn to
release the lock. Pull the lamp har-
ness out of the back of the assem-
bly.
3. Remove the lamp from the harness
and replace it with the recom-
mended l amp.
4. Test the taillight/brakelight to see
that it’s working.
5. Repla c e the lamp har ne ss into the
bac k of the taillight assembly, twist-
ing 1/4 turn to lock in place.
6. Reinsta ll the taillight a ssembly to
the vehicle .
Indicator Lamp Replacement
1. Follow steps 1 - 3 of Headlight
Housing Replacement on pre-
vious page.
2. Unplug light from harness.
3. Using a screwdriver, turn the light
1/4 turn counter clockwise.
4. Install new light and use a screw-
driver to seat it into place, 1/4 turn
clockwise.
5. R eassemble pod.
Taillight Assembly
Lamp
Lamp
Harness
Lens