Filter
Top Products
53
OPERATION
Starting a W arm Engine
Warm engines do not normally require the use of the choke since the
spark plug can easily become wet fouled.
1. P lace the transmission in neutral and push the vehicle to a level sur-
face.
2. Lock the parking brake.
3. Turn the fuel tank valve to ON.
4. Sit on the vehicle.
5. If the engine has cooled to a point where it does not readily start, inter-
mittent use of the choke button pulled half way out is permitted.
6. If the engine is over-choked by mistake when warm, depress the
throttle lever fully while cranking to aid in starting.
7. Release the throttle lever immediately after the engine starts. If the en-
gine does not start and all conditions are favorable, change the spark
plug.