Filter
Top Products
38
CONTROLS
Light Switches
The light switch is located on the left handlebar. It’s used to turn the
lights on and off and to switch the lights from HI to LO. NOTE: The
lights won’t work unless the key is in the on position and the shut-off
switchisintherun position.
Brake Lever
The fron t and rear brakes are a pplied
by sq ueezing the brake lever (1 )
toward the handlebar. The front and
rear brakes are hydraulically
activ ated disc type brakes that are
activated by only one lever.
Always test brake lever travel and
master cylinder fluid level before riding.
When squeezed, the lever should feel firm. A ny sponginess would
indicate a possible fluid leak or low master cylinder fluid level, which
must be corrected before riding. Contact your dealer for proper
diagnosis and repairs.
Operat ing the ATV o n streets o r roads, espec ially in darkness, could
result in an accident and serious injur y or death.
Your ATV is not equipped with h ighway-approved lights . It’s
designed for and must be used for off- road use only. Use caution
and drive at reduced speeds in conditions of reduced visibility such
as fog, rain and darkness.
WARNING
1
Operat ing the ATV with a spongy brake lever can result in
loss of braking, which could cause an accident.
Never operat e the ATV with a spongy-feeling brake lever .
WARNING