Filter
Top Products
Turning the DVD player on
or off
! Only the remote control can operate this
function. To perform this function, switch
the remote control operation mode to DVD.
(Refer to page 14.)
% Press REAR.S to turn the DVD player
on.
# To turn the DVD player off, press REAR.S
again.
Selecting a disc
! Only when a multi-DVD player is connected
to this unit, you can operate this function.
% Touch any of 16 to select the desired
disc.
# When 16 are not displayed, you can display
them by touching DISP.
# You can also sequentially select a disc by
using a/b.
# You can also skip back or forward to another
disc by moving the joystick up or down.
When using the joystick on the remote control,
switch the remote control operation mode to
AVH. (Refer to page 14.)
# You can also select a disc by pressing BACK
or ENTERTAINMENT on the remote control when
the remote control operation mode is switched to
DVD.
Introduction of advanced
DVD player operation
1
1 Function display
Shows the function names.
% Touch A.MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
# When A.MENU is not displayed, you can dis-
play it by touching the screen.
# You can also display MENU by clicking the
joystick.
# To return to the previous display, touch BACK.
# To return to the playback display, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
! During PBC playback of Video CDs, this
function cannot be operated.
1 Touch A.MENU and FUNCTION and then
touch REPEAT.
DVD Player
En
63
Section
13
DVD Player